CUSTOMER SERVICE: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Free Ground Shipping
*Orders Over $100
*Oversize Fees May Apply

Blog
Read Our Blog Here!
New Stories Weekdays


  Home > RC Parts & Accessories > Helicopter Accessories >

  350QX Prop Adapter Bundle with 4 APC props (APC08047SF-P)
350QX Prop Adapter Bundle with 4 APC propellers


 
Alternative Views:





Our Price: $35.75

Stock Status:(Out of Stock)
Product Code: RRH350QXPROPADAPTER-BUNDLE
Qty:

Description Important Information
 
This bundle includes (1) Propeller adapter set, (2) APC08047SF and (2) APC08047SFP


Each E-Flite Blade 350QX propeller adapter is CNC machined from billet aluminum. These adapters will bolt on to the stock BLH7802 motors allowing for a large variety of aftermarket propellers to be used. They have a 6mm propeller shaft which can be used with the traditional style quadcopter propeller sets.

The adapters are very strong and light. Replacing the stock propellers with a good quality aftermarket propeller will give you the confidence needed for worry free flying.

This set includes 2 right handed thread adapters and 2 left handed thread adapters.

Installation is quick and simple. No modifications necessary.

Make the switch even easier with the RC Logger Bit Set

Give you new propeller adapter set a nice finished look by adding these propeller nuts.

CNC Prop Nut Set

Also sold individually in Red (CW), Blue (CCW), Silver (CW) and Black (CCW)

Two step installation:

  1. Install prop adapter onto stock BLH7802 motor using the supplied M2.5 x 4mm socket head screws.
    (each bag will be labeled indicating which motor the adapters should be installed on)
  2. Install propeller onto adapter using supplied M6 Hex Nut.

Included: 4 - E-Flite Blade 350QX Prop Adapters (2 right handed thread / 2 left handed thread), 16 - M2.5 x 4mm socket head screws
2 - M6 right handed thread hex nuts, 2 - M6 left handed thread hex nuts, 4 - M6 Flat Washers

Weight (single prop adapter only): 3.1g

Dimensions:

  • Shaft Diameter: 6mm
  • Shaft Thread: M6x1.0 (2 right handed thread and 2 left handed thread)
  • Shaft Length: 15.2mm
  • Base Thickness: 5.5mm


Compatible Motors

Blade Helicopters BLH7802

**IMPORTANT: Don't use the screws that came with the 350 QX to bolt the prop adapters on the motors. Serious damage to your motor will result. You will cry for what will happen!


Average Customer Review: 5 of 5 | Total Reviews: 1 Write a review.

Accessories for this product...
E-Flite Blade 350QX Prop Nut Set
Our Price: $13.95

Add
E-Flite Blade 350QX Prop Nut Set
(2) APC Slow Flyer Electric Prop: 8X4.7SF
Our Price: $11.80

Add
(2) APC Slow Flyer Electric Prop: 8X4.7SF & (2)  Slow Flyer Pusher Prop, 8 x 4.7 SFP for the 350QX Prop Adapter Set
RC Logger Bits Set, heli tools
Our Price: $24.90

Add
RC Logger Bits Set


  0 of 0 people found the following review helpful:
 
E-Flite Blade 350 Prop Adapters and APC Props April 8, 2014
Reviewer: Ralph E. Taggart from Mason, MI United States  
When one of the stock "B" props broke in flight (fortunately very close to the ground!), I knew I needed a better prop option. These adapters screw to the front face of the motors, letting you use a wide range of after-market props.

The 8 x 4.7 APC props supplied with the bundle are a great match to the Blade 350. The prop are quieter than the stock units and provide excellent performance. In general, the APC prop motor runs are 30 seconds to a minute longer on a fresh charge than with the stock props and you can stop worrying that a prop may self-destruct in flight!

All-in-all, a great solution to the Bade 350 prop problems at a good price!

Was this review helpful to you?


Browse for more products in the same category as this item:

RC Parts & Accessories > Helicopter Accessories
Blade 350 QX Parts Listing
Blade 350 QX Parts Listing > Optional Propellers