This bundle includes (1) Propeller adapter set with (2) Clockwise Carbon Fiber blades and (2) Counter Clockwise Carbon Fiber Blades.
These Carbon Fiber blades have been tested with the 350 QX propeller adapters and the 350 QX
Please note that the Carbon Fiber
propellers do NOT have directional arrows indicating the correct
propeller for the specific motor. Please use caution when switching to
the carbon fiber propellers and verify correct pitch before removing and
Each E-Flite Blade 350QX propeller adapter is CNC machined from billet aluminum. These adapters will bolt on to
the stock BLH7802 motors allowing for a large variety of aftermarket
propellers to be used. They have a 6mm propeller shaft which can be
used with the traditional style quadcopter propeller sets.
The adapters are very strong and light. Replacing the stock propellers
with a good quality aftermarket propeller will give you the confidence
needed for worry free flying.
This set includes 2 right handed thread adapters and 2 left handed thread adapters.
Installation is quick and simple. No modifications necessary.
Make the switch even easier with the RC Logger Bit Set
Give you new propeller adapter set a nice finished look by adding these propeller nuts.CNC Prop Nut Set
Also Sold individually in Red (CW), Blue (CCW), Silver (CW) and Black (CCW)
Two step installation:
Install prop adapter onto stock BLH7802 motor using the supplied M2.5 x 4mm socket head screws.
(each bag will be labeled indicating which motor the adapters should be installed on)
Install propeller onto adapter using supplied M6 Hex Nut.
Included: 4 - E-Flite Blade 350QX Prop Adapters (2 right handed thread / 2 left handed thread), 16 - M2.5 x 4mm socket head screws
2 - M6 right handed thread hex nuts, 2 - M6 left handed thread hex nuts, 4 - M6 Flat Washers
Weight (single prop adapter only): 3.1g
Shaft Diameter: 6mm
Shaft Thread: M6x1.0 (2 right handed thread and 2 left handed thread)
Shaft Length: 15.2mm
Base Thickness: 5.5mm
Blade Helicopters BLH7802
**IMPORTANT: Don't use the screws that came with the 350 QX to bolt the prop adapters on the motors. Serious damage to your motor will result. You will cry for what will happen!