CUSTOMER SERVICE: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Free Ground Shipping
*Orders Over $100
*Oversize Fees May Apply

Read Our Blog Here!
New Stories Weekdays

  Home > RC Parts & Accessories > Helicopter/Multi Rotor Parts >

  Blade 350 QX 3 Blade Prop Bundle Set Red and White
Blade 350 QX 3 Blade Props

Alternative Views:

Our Price: $11.98

Availability: : Currently Unavailable
Product Code: RRH350QX01-RW


Our Blade 350 QX 3 Blade Prop Bundle Set Includes

  • 1 Red clockwise propeller
  • 1 White clockwise propeller
  • 1 Red counter clockwise propeller
  • 1 White counter clockwise propeller
  • Props mount directly onto the stock Blade 350 Motor with no adapters needed!
  • Mounting screws included
  • Blade 350 QX and Go Pro Camera sold separate
Flight times of 10-11 minutes with a Go Pro Camera attached are possible using our Lectron Pro 2700mah battery

Average Customer Review: 2 of 5 | Total Reviews: 5 Write a review.

  1 of 1 people found the following review helpful:
Motors Seriously Overheating!!! September 10, 2014
Reviewer: lou Arias from Long Beach, CA United States  
If you are considering buying these props DON'T you will destroy your BLADE  they will seriously overheat your motors there are  no cooling vents on top like on stock props. I just had one of my motors melt the plastic motor mount and pull loose on the first flight luckily I was about to land when I heard the prop hitting the body then the motor came off. Now I have to buy another body. Upon closer inspection all the motors were extremely hot and the mounts were loose and I could smell melted plastic.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
For the most part, I like them. June 22, 2014
Reviewer: J.R. Johnson from Orlando, FL United States  
Bought 2 sets for both my 350's and they work quite well.  I too am a bit concerned about the non-ventilated hubs causing an overheat issue in the motors as the 3rd blade adds that much more load.  Performance wise they're very good.  Punching the throttle to full and holding for 2:45 in a vertical climb topped out well over 3500ft.  Took over 7 min to descend with motors at idle as the props provided excellent drag.  Using the LECTRON PRO 2700mAh battery still only gives me about 8min or less of flight time as I can be quite aggressive with it....but it's a wild 8min.  They're pretty good props, but they really should be ventilated as the hub completely covers the motor.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
3-bladed 350QX props June 18, 2014
Reviewer: Robert Lee from Chester, VA United States  
I tried them out without problem for a couple of flights, but after reading several reports of them coming apart in the air, I've removed them from my quad and gone back to B blades from Horizon Hobby.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
JUNK June 18, 2014
Reviewer: ERIK TYSON from COLONIAL HEIGHTS, VA United States  
Super flimsy, poorly made.  In fact didn't even put them on my quad.  Absolutely horrible quality.  Red Rocket should be ashamed of themselves for selling such a poorly made product knowing they are going to fail.  Do not buy!!! Waste of $14.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Interesting and fairly cheap but..... June 15, 2014
Reviewer: Philip Myers from Goshen, IN United States  
The best feature was how quiet the are!  Well they're at least as quiet as the Mytech's but I only gained maybe 30 seconds back in flight time and one really annoying thing is that they overheat my motors to where they're too hot to touch! I had feared this since they don't sport the same openings as the stockers....So I used a round file and put half round grooves between each blade, angled in the rotation direction and it seems to keep them cooler by letting some air pass thru the hat of the motor. You'll find that two grooves work but one will have a screw boss in the way....I worked around it but it passes very little air in that notch. The other drawback is that it no longer fits in the box and I really like to keep my stuff in the box for transport and storage! So, they are quiet, cut some flight time, run hot and wont fit back in the box. They are staying on until something better arrives but I'm a little disappointed in them. Nuff said.

Was this review helpful to you?

Browse for more products in the same category as this item:

RC Parts & Accessories > Helicopter/Multi Rotor Parts
Blade 350 QX Parts Listing
Blade 350 QX Parts Listing > Optional Propellers