Each E-Flite Blade 350QX propeller adapter is CNC machined from billet aluminum. These adapters will bolt on to
the stock BLH7802 motors allowing for a large variety of aftermarket
propellers to be used. They have a 6mm propeller shaft which can be
used with the traditional style quadcopter propeller sets.
The adapters are very strong and light. Replacing the stock propellers
with a good quality aftermarket propeller will give you the confidence
needed for worry free flying.
This set includes 2 right handed thread adapters and 2 left handed thread adapters.
Installation is quick and simple. No modifications necessary.
Need propellers? We recommend the following:
APC Propellers (8X4.7)
APC Propellers (8X8.3)
Carbon Fiber PropellersAPC Multi-Rotor Propellers (8X4.5)
Check out our Bundle Package:
APC Propeller BundleAPC Muli-Rotor Propeller Bundle
Carbon Fiber Propeller Bundle
Make the switch even easier with the RC Logger Bit Set
Give your new propeller adapter set a nice finished look by adding these propeller nuts:
CNC Prop Nut Set
Sold individually in Red (CW), Blue (CCW), Silver (CW) and Black (CCW)
Two step installation:
Install prop adapter onto stock BLH7802 motor using the supplied M2.5 x 4mm socket head screws.
(each bag will be labeled indicating which motor the adapters should be installed on)
Install propeller onto adapter using supplied M6 Hex Nut.
Included: 4 - E-Flite Blade 350QX Prop Adapters (2 right handed thread / 2 left handed thread), 16 - M2.5 x 4mm socket head screws
2 - M6 right handed thread hex nuts, 2 - M6 left handed thread hex nuts, 4 - M6 Flat Washers
Weight (single prop adapter only): 3.1g
Shaft Diameter: 6mm
Shaft Thread: M6x1.0 (2 right handed thread and 2 left handed thread)
Shaft Length: 15.2mm
Base Thickness: 5.5mm
Blade Helicopters BLH7802
**IMPORTANT: Don't use the screws that came with the 350 QX to bolt the prop adapters on the motors. Serious damage to your motor will result. You will cry for what will happen!