Blade 450 3D RTF

CUSTOMER SERVICE: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Shop By Department:

*Orders Over $110

*Oversize Fees May Apply

Home > Helicopters >

Blade 450 3D RTF

Alternative Views:

Blade 450 RTF Complete Parts Listing

Our Price: $469.99 (This item has an oversized fee)

Product Code: BLH1600

Qty:

Description

Technical Specs

Important Information

The Blade 450 3D RTF blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with the kind of pro-class electronics and mechanics you would expect to find in more expensive kits that take hours to build. It’s even been flight tested and had the rotors balanced at the factory so you don’t have to do any setup. Simply charge its 3S 2200mAh 30C Li-Po battery and fly.

Attention Blade® 450 3D RTF and BNF Basic Owners

Horizon Hobby has discovered errors in the transmitter programming instructions for the Spektrum™ DX7, DX7se, and DX8. Please immediately replace pages 39 and 40 of the original Blade 450 3D helicopter manual with the updated pages dated 06/2011 found at the following link.

Failure to follow the updated instructions and ignoring pre-flight tests could result in loss of helicopter control.

Features

The DS76-series servos are specially designed to deliver maximum power and precision for extreme 3D heli flight
The G210HL gyro uses the latest in MEMS technology to provide amazing holding power during the most aggressive 3D maneuvers
The robust 35A speed controller is engineered to efficiently channel the high current flow of most any high-C 3S Li-Po battery
The compact 4.0 gram AR6115E receiver provides the superior response of Spektrum DSM® control as well as the benefit of ServoSync which dramatically enhances the precision of any CCPM heli
The rotor head mechanics have been optimized to provide the most aggressive 3D control response possible
Also Available in a BNF Version BLH1650

Average Customer Review:

4 of 5

| Total Reviews: 1 Write a review.

0 of 0 people found the following review helpful:

Was not set up properly	October 9, 2012
Reviewer: Rookie from Thornton, CO United States

All of the advertising for this heli indicates perfect setup and balance out of the box. This was not the case with mine. I had to remove the head and start from scratch with the off center servos, subtrims out, swash plate rods of different lengths, and the blade tracking was off by 5 degrees. At least I got a nice lesson on setup prior to flight. Otherwise a great machine except for the crappy servos that strip easily.

Was this review helpful to you?

Browse for more products in the same category as this item:

Helicopters
Helicopters > Blade Store
Helicopters > Blade Store > Ready To Fly