Red Rocket Hobby Shop
( 0 items $0.00 )
(9am-4pm PT Mon-Fri)
Shop By Department:
*Orders Over $110
*Oversize Fees May Apply
Read Our Blog Here!
Blade 500 X BNF Helicopter
Blade 500 X BNF Complete Parts Listing
This item does
include a transmitter.
Wishpot add this item to your
The Blade® 500 X BNF combines BeastX™ flybarless technology with Bind-N-Fly® convenience to bring advanced pilots a big, powerful 3D heli they can have flying in the time it takes to charge a battery. It comes out of the box assembled and equipped for aggressive 3D with an E-flite® 520H 1320Kv brushless motor and high-output 6S 30C Li-Po battery. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build. You simply charge the battery, install the main blades, bind the receiver and fly.
AR7200BX Flybarless Control
Going flybarless is a great way to unleash the animal in any 3D helicopter. By eliminating the mechanical complexity and weight of a flybar, you can achieve faster head speeds and lighter disc loading. This translates into a helicopter that’s much more eager to perform aggressive 3D maneuvers. The BeastX™ 3-axis MEMS flybarless stabilization system is the most powerful flybarless technology available for high-performance 3D helicopters. Its unrivaled responsiveness and precision completely transforms any 3D flying experience.
The Blade 500 X brings you all the benefits of BeastX technology through the amazing Spektrum™ AR7200BX flybarless control system. This groundbreaking innovation combines a 7-channel DSMX® receiver with the BeastX system into a single, compact unit that weighs barely over ½ an ounce. Perhaps best of all is how simple the AR7200BX is to set up. Because BeastX flybarless technology doesn’t require a special interface to make adjustments, you can easily tune your heli’s response at the field using just the AR7200BX unit and a DSM2/DSMX computer transmitter with heli programming.
Experience Level: Advanced
Rotor Type: Collective Pitch Single Rotor
Completion Level: Bind-N-Fly
Recommended Environment: Outdoor
Assembly Time: 1-3 Hours
Main Rotor Diameter: 38.2 in (893mm)
Main Rotor Blade Length: 425mm
Main Blade Material: Carbon fiber
Tail Rotor Diameter: 7.8 in (198mm)
Battery: 22.2V 6S 2900mAh 30C Li-Po (included)
Speed Control: 70-Amp
Pinion Size: 13 tooth
Main Gear Ratio: 9.6:1
Tail Ratio: 0.00074838
Tail Drive: Belt drive
Length: 33.5 in (850mm)
Width: 6.1 in (156mm)
Height: 11.8 in (300mm)
Flying Weight: 3.88 lb (1.76 kg)
Approximate Flight Time: 4 minutes
Number of Channels: 6
Is Assembly Required: No
Swashplate Type: 120-degree CCPM
Needed To Complete
6+ channel DSM2- or DSMX-compatible computer transmitter with helicopter programming
Spektrum™ AR7200BX DSMX® Receiver with Integrated BeastX™ Flybarless Technology
425mm Carbon Fiber Main Blades
Single-Piece, Carbon Reinforced Side Frames
CNC Machined Aluminum Head Block
CNC Machined Aluminum Swash Plate
Triple Ball Bearing Supported Hardened Steel Main Shaft
Spektrum S300 Digital Servos with S400G digital tail servo
E-flite® 520H 1320Kv Brushless Motor
E-flite® 6S 22.2V 2900mAh 30C Li-Po Battery
E-flite® 70A S-BEC Speed Control
Aluminum Tail Boom
Belt-Driven Tail Rotor with Thrust Bearings in the Grips
Weighted Tail Blade Hardware
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Bind n Fly
About Red Rocket
Why Buy From Us?
View My Cart
Read Blog Articles
Become an Affiliate
Are you a good person?