This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.

It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. The Bind-N-Fly version is ready for customers who already have a compatible DSM2/DSMX aircraft transmitter. Also includes two 1S 200mAh 30C batteries, single port charger with AC adapter and a 1S High Current Ultra-Micro Battery Adapter Lead.

Using an integrated AS3X™ Digital Flybarless System, the heli gets up in the air without a mechanical flybar. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mCP X 2 a sense of stability and responsiveness no other collective-pitch heli its size can match.

The helicopters' software has been designed to be used with the DX4e, DX5e, DX6i, DX7, DX7s and DX8 transmitters, while allowing commonly used collective pitch functionality such as throttle hold or stunt mode.

Version 2 Changes:

Digital 3-Axis AS3X Sensor
Large Diameter Tail Rotor
Swashplate Ball Link Dampers
1S 200mAh 30C Battery

• Size/Scale: Ultra Micro
• Experience Level: Intermediate
• Recommended Environment: Indoor/Outdoor
• Rotor Type: Collective Pitch Single Rotor
• Completion Level: Bind-N-Fly
• Length: 9.25 in (235mm)
• Gross Weight: 1.60 oz (45.5g)
• Tail Rotor Diameter: 1.50 in (38.1mm)
• Main Rotor Diameter: 9.65 in (245mm)

Needed To Complete

You will need a Spektrum DX4e, DX5e, or any programmable DSM2 or DSMX transmitter