The Carbon-Z™ Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. Carbon-Z is as strong and light as wood and gives the Yak 54 the kind of rigidity that allows it to fly with the energy and precision of a larger scale model. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with a customized high-output brushless power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits.

Best of all, you can have this Bind-N-Fly® version flying in as little time as it takes to charge its battery and bind the receiver to a full-range DSM2 aircraft transmitter. To get the most from the Carbon-Z Yak 54, a programmable DSM2 aircraft transmitter with dual rates and exponential function is recommended.

• Wingspan: 48.0 in (1220mm)
• Overall Length: 48.5 in (1230mm)
• Wing Area: 525 sq in (34.0 sq dm)
• Flying Weight: 3.75-3.80 lbs (1.70-1.73kg)
• Motor Size: 25-size 1,000Kv Brushless Outrunner (included)
• Radio: 6+ Channel Transmitter (AR600 included)
• Trim Scheme Colors: Red Pantone 185C, Blue Pantone 286C
• CG (center of gravity): At wing tip, 6 inches (153mm) forward from the aileron trailing edge
• Wing Loading: 16.2 oz/sq foot (50.1 grams/sq dm)
• Prop Size: 12 x 5.25 (305 x 133mm) (included)
• Spinner Size: 1.57 in (40mm)
• Speed Control : 60-Amp Pro Switch-Mode BEC Brushless (included)
• Recommended Battery: 2,800mAh 4S 14.8V LiPo (included)
• Flaps: No
• Retracts: No
• Control Throw (Ailerons): Low: 30mm, High: 65-70mm up/down at aileron root
• Control Throw (Elevator): Low: 15mm, High: 48-50mm up/down at counter balance leading edge
• Control Throw (Rudder): Low: 45mm, High: 65mm right/left at counter balance leading edge
• Approx. Flying Duration: 5 minutes
• Charger: 4S variable rate DC Li-Po balancing charger (included)
• Minimum Age Recommendation: 14 years
• Experience Level: Intermediate
• Recommended Environment: Outdoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: Yes

Needed To Complete:

• A full range DSM2 compatible aircraft transmitter (with programming capabilities highly recommended)