Red Rocket Hobby Shop
( 0 items $0.00 )
(8am-5pm PT Mon-Thur 8am-12pm Fri)
Shop By Department:
*Orders Over $110
*Oversize Fees May Apply
Read Our Blog Here!
New Stories Weekdays
E-Flite Mini Ultra Stick ARF R/C Airplane
Mini Ultra Stick ARF Complete Parts Listing
Important: Not eligable for USPS Air shipping
Wishpot add this item to your
E-Flite Mini Ultra Stick ARF R/C Airplane! Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stickís fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
The Mini Ultra Stick can be assembled and ready for flight in just 1 to 2 hours thanks, to:
Preinstalled control surfaces and hinges
Preinstalled control horns
Bolt-on horizontal and vertical stabilizers
Preassembled landing gear with wheels attached
Wing Span: 38.75 in (985mm) Overall Length: 34 in (865mm) Wing Area: 325 sq in (21 sq dm) Flying Weight: 22 - 25 oz (625 - 710g) Motor Size: Park 400 Inrunner or Park 450 Outrunner Radio: 4-channel or greater (7-channel for quad flaps) Servos: 4 sub-micros (6 sub-micros for quad flaps) Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White CG (center of gravity): 2.25 in (57mm) behind the leading edge Prop Size: 10x7 - 11x7 Hardware Included: Yes Speed Control : 20A Brushless Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po Flaps: Yes (optional) Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate Approx. Flying Duration: 10-20 minutes Scale: Park Flyer Approx. Assembly Time: 1-2 hours Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner
Needed To Complete
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
Perfect transitional airplane for beginners who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer Design based on Hangar 9ís popular line of Ultra Sticks Lightweight balsa and ply construction Covered in genuine Hangar 9 UltraCote Two firewall options let you use a wide variety of motor sizes, types and brands Includes molded firewall stick mount Optional quad-flap configuration Tough, lightweight aluminum landing gear thatís pre-assembled and tall enough to accommodate larger prop sizes 95% pre-builtóget flying in 2 hours or less Control surfaces have pre-installed hinges and control horns Bolt-on tail requires no gluing and secures with two lock nuts Great match for E-flite Park 450 Outrunner Brushless Motor Easy access battery hatch
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
ARF Almost Ready To Fly
About Red Rocket
Why Buy From Us?
View My Cart
Read Blog Articles
Become an Affiliate
Are you a good person?