Red Rocket Hobby Shop
( 0 items $0.00 )
(9am-4pm PT Mon-Fri)
Shop By Department:
*Orders Over $100
*Oversize Fees May Apply
Read Our Blog Here!
New Stories Weekdays
E-flite Inverza 280 BNF Basic
Inverza 280 BNF Basic Parts Lising
This item does
include a transmitter.
Wishpot add this item to your
The E-flite® Inverza™ 280 BNF Basic is a collaborative original design by RC aerobatic world champion Quique Somenzini, full-scale aerobatic aircraft craftsman Kevin Kimball and aviation artist Mirco Pecorari. Never before has an aerobatic aircraft been developed with a more dynamic team effort. Its unique blend of performance, grace and potency offers exceptional aerobatic performance for 3D, precision or scale flight, sized for you to enjoy at a convenient park or small field. Everything about its design, from its fit and finish to its original outline, reflects exceptional attention to the needs of performance minded pilots. As soon as you open the box, its design clearly reflects what experience has been missing from the world of aerobatics.
280-size brushless outrunner (installed)
10-amp brushless (installed)
Less than 1 Hour
Control Throw (Ailerons):
Low: 12mm up/down, 30% expo; High: 25mm up/down, 40% expo
Control Throw (Elevator):
Low: 7mm up/down, 20% expo; High: 35mm up/down, 60% expo
Control Throw (Rudder):
Low: 8mm right/left, 20% expo; High: 20mm right/left, 35% expo
8.3 oz (235 g)
Is Assembly Required:
Main Wing Tube Length:
Main Wing Tube OD:
Recommended Motor Battery:
11.1V 3S 450mAh LiPo
1.18 in (30mm)
7.7 oz/sq ft (23.5 g/sq dm)
26.0 in (660mm)
You will need...
Full-range 4+ channel DSM2/DSMX aircraft transmitter with adjustable dual rates and expo
11.1V 3S 450mAh LiPo flight battery
Charger for flight battery
Minimal assembly and setup required
Hollow-molded foam construction with carbon fiber reinforcement
High-speed digital servos and Spektrum™ Nanolite receiver installed
High-power BL280, 1800Kv outrunner power system installed
High-performance custom propeller and matching spinner
Two-piece wing with easy-access attachment and carbon fiber joiner
Magnetic top and bottom hatches provide instant access
Large, double-beveled control surfaces attached with CA hinges
Robust wire landing gear and steerable tail wheel
Ready to bind to your DSM2®/DSMX® transmitter
Accessories for this product...
Lectron Pro 11.1 volt
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
SHOP $10 OFF BNF
About Red Rocket
Why Buy From Us?
View My Cart
Read Blog Articles
Become an Affiliate
Are you a good person?