The E-flite’ UMX’ AS3Xtra takes Ultra Micro eXtreme to the next level. Constructed of laser-cut flat foam with carbon reinforcement and micro-thin film, this aircraft was specifically engineered to optimize a super-low wing loading, strength and durability plus AS3X’ technology to provide outstanding 3D performance in tight flight spaces. Based on the ground breaking original UMX Extra 300 3D, the addition of AS3X technology makes it possible to be even more successful whether it’s performing the simplest loop or the latest extreme 3D moves. Even more appealing is that now AS3X technology offers flight mode flexibility so you can choose the level of stability performance you need instantly.
The UMX AS3Xtra is the perfect high-performance indoor ultra micro aircraft for the intermediate to advanced pilot. All you need to fly right away is your favorite DSM2’/DSMX’ transmitter with dual rate options, a 25C or 45C 1S 3.7V 150mAh Li-Po battery and a 1S Li-Po charger.
AS3X’ System agility with flight mode flexibility E-flite DSM2’/DSMX’ 6-Ch UM AS3X Receiver/Servos/ESC installed Four-channel, 3D maneuverability and control Spektrum’ 2.3-Gram Performance Linear Long Throw servos installed Ultra-lightweight power system delivers the best possible performance Resilient carbon fiber reinforced, film-covered foam construction Optional SFGs allow you to customize aerobatic capability Ideal for experienced pilots to fly anywhere indoors
Wingspan: 16.8 in (426mm) Overall Length: 19.8 in (503mm) Wing Area: 74 sq. in. (472 sq. cm.) Flying Weight: 1.25 oz (36.5 g) Motor Size: 8.5mm x 23mm brushed Radio: 4+ channel DSM2/DSMX transmitter (required) Servos: (2) 2.3-Gram Performance Linear Long Throw servos (installed) CG (center of gravity): 3.2 in (81mm) forward from the trailing edge of the aileron at the fuselage Prop Size: 130mm x 70mm Recommended Battery: 3.7V 1S 150mAh LiPo battery (required) Approx. Flying Duration: 4-5 minutes Minimum Age Recommendation: 14 years Experience Level: Intermediate Recommended Environment: Indoor Is Assembly Required: No
You will need…
– 4+ channel DSM2/DSMX transmitter
– 3.7V 1S 150mAh LiPo flight battery
– 1S LiPo battery charger