WING SET: APPRENTICE  

Includes left and right wing panels with wing tube pre-installed, as well as wing caps, aileron pushrods and aileron control horns. Decals are applied to the upper wing surface. Customer will need to install servos and apply decals to the lower wing surf

 

FUSELAGE: APPRENTICE

Includes fuselage with decals applied, firewall, wing hold down rods, nose gear steering arm and pushrods.

 

TAIL SET: APPRENTICE

Includes vertical fin/rudder, horizontal stabilizer/elevator, control horns and tail screws. Decals are pre-applied.

 

COWL: APPRENTICE  

Replacement Cowl for E-Flite Apprentice

 

PUSHROD SET: APPRENTICE 

Includes elevator and rudder pushrods, clevis and retainers.

 

NOSE GEAR: APPRENTICE 

Includes wire nose gear, nose wheel and wheel collar.

 

MAIN LANDING GEAR: APPRENTICE 

Includes wire main landing gear, wheels and wheel collars.

 

SPINNER: APPRENTICE 

Includes spinner cone and backplate.

 

MOTOR MOUNT: APPRENTICE

Includes motor mount, motor screws, firewall screws and washers.

 

5MM PROP ADAPTER: APPRENTICE 

 

30-AMP PRO SB BRUSHLESS ESC  

 

 

3200MAH3S11.1V 15C LIPO,13GA EC3  

 

 

2-3SLIPOBALANCING CHARGER,0.5-3A 

 

 

BL15, 840KV 

 

 

11 X 8 ELECTRIC PROP 

 

 

12G SUB-MICRO SERVO (Recommended quantity: 2)

 

 

13G SUB MICRO SERVO 

 

 

37G STANDARD SERVO

 

 

DX5E 5CH FULL RANGE TX/RXONLYMD2