 |
 |
 |
|
| The Blade™ CP+ is the perfect “next step” for anyone who’s mastered the basics of heli flight with a coaxial heli like the Blade CX (EFLH1200) or Blade CX2 (EFLH1250), and is ready for a model capable of more advanced maneuvers. It’s also an excellent choice for experienced pilots looking for the best in ready-to-fly micro helicopter performance and value.
Attention Blade CP+ Pilots: We stock the brand new Plasti-Blades! These blades are a MUST for anyone wanting to save on replacement parts. These blades have been flown into the ground, trees, even a metal work bench and have not failed. Checkout the new Plasti-Blades now!
For advanced pilots the new Symmetrical Plasti-Blades are now available! The Blade CP+ includes all the impressive features of the original Blade CP, like CCPM and collective pitch, plus a number of new features and accessories that further enhance its flight performance for low-time and experienced pilots alike. The included, optional-use training gear set adds stability while also providing support and cushioning to prevent tip-overs and rotor blade strikes for newer pilots. The 3S 11.1V 800mAh Li-Po battery pack offers a significant boost in power and duration over the Ni-MH batteries found in other similar class models, and the included, optional-use symmetrical main rotor blades allow you to perform advanced aerobatics like loops, rolls and inverted flight without the need for a single hop-up. The separate receiver and advanced 3-in-1 control unit are plug-and-play compatible with brushless power systems and heading lock gyros so you can further enhance the capabilities of your Blade CP+ when you’re ready to take performance to the next level. The Blade CP+ is versatile enough to fly anywhere, and everything needed to fly is included and installed such as the 3S 11.1V 800mAh Li-Po battery pack and balancing charger, 370 main and N30 tail motor, 3-in-1 mixer, ESCs and gyro, three S75 sub-micro servos and a 6-channel FM radio system with servo reversing and CCPM mixing. Plus, each Blade CP+ is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. Nothing can touch the cutting-edge performance and value of the Blade CP+.
|
|
|
|
|
|
 |
|
 |
|
Features
- No assembly required
- Includes everything you need to fly right out of the box
- Each model is individually test-flown at the factory
- CCPM (Cyclic/Collective Pitch Mixing) and collective pitch provide complete control
- Unique 6-channel FM receiver and advanced 3-in-1 control unit
- Plug-and-play compatibility with brushless power systems and heading lock gyros
- Optional hop-up and full replacement parts sold separately
- PLUS, at no extra cost, you get:
- An optional-use Training Gear Set for added stability and to prevent blade strikes
- Optional-use wooden symmetrical main blades for inverted flying and aerobatics
- 3S 11.1V 800mAh Li-Po battery pack
- DC Li-Po balancing charger
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
E-Flite Tail Rotor Drive Gear & Shaft Set BCP, BCP
|
|
|
|
|
|
|
E-Flite Tail Motor w/8T 0.5M Pinion BCP, BCPP
|
|
|
|
|
|
|
E-Flite 370 Motor w/9T 0.5M Pinion BCP, BCPP
|
|
|
|
|
|
|
E-Flite Training Gear Set Blade CP
|
|
|
|
|
|
|
E-Flite Spindle BCP, BCPP
|
|
|
|
|
|
|
E-Flite Vertical Tail Support BCP, BCPP
|
|
|
|
|
|
|
E-Flite 3-in-1 Control Unit, Mixer/ESC/Gyro BCPP
|
|
|
|
|
|
|
E-Flite Symmetrical Main Blade Set BCP, BCPP
|
|
|
|
|
|
|
E-Flite Flat Bottom Main Blade
|
|
|
|
|
|
|
E-Flite 3-Cell LiPo Balancing Charger 0.8A
|
|
|
|
|
|
|
E-Flite Landing Skid Set BCP, BCPP
|
|
|
|
|
|
|
E-Flite Decal Sheet BCP
|
|
|
|
|
|
|
E-Flite 11.1V 800mAh 3S LiPo, JST/Bal BCP, BCPP
|
|
|
|
|
|
|
E-Flite Tail Rotor Blade BCP, BCPP
|
|
|
|
|
|
|
E-Flite Center Hub & Spindle Set BCP, BCPP
|
|
|
|
|
|
|
