E-Flite Ultra-Micro 4-Site BNF

View Cart

My Account

International

Help

Customer Service: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Shop by Department

Quick Links

Join Our Mailing List

Email Address:

Home > R/C Airplanes >

E-Flite Ultra-Micro 4-Site BNF

In Stock! Limited Quantites!

Our Price: $169.99

Product Code: EFL9080

Qty:

Description

Technical Specs

The 4-Site™ Bind-N-Fly Ultra-Micro Flyer from E-flite is designed to give experienced 3D pilots, who already have a Spektrum or JR 2.4GHz DSM2 system, a thoroughly-capable 3D machine that can be flown at the local gym.

The “secret” behind the Ultra-Micro™ 4-Site’s awesome 3D-capabilities is a unique manufacturing technique that results in foam wing, fuselage and tail parts that are actually lighter, stiffer and more durable than standard sheet foam. It also gives the wing an airfoil shape that provides superior flight performance to standard sheet foam.These parts are further reinforced with carbon rod and foam bracing that minimizes in-flight flexing and twisting. This exceptionally robust construction, combined with the performance of independent aileron servos, gives the 4-Site a level of control and responsiveness any 3D foamie expert will love.

The 4-Site BNF comes completely assembled with a Spektrum AR6400L Ultra-Micro DSM2 Receiver/ESC/Servo unit that features two built-in linear long-throw servos for the elevator and rudder. This along with the two independent long-throw Spektrum AS2000L Ultra-Micro servos on the ailerons provide great performance. Also included are two 1S 3.7V 150mAh Li-Po battery packs as well as E-flite’s Celectra 4-Port Li-Po charger and AC adapter that allows you to charge up to four 1S Li-Po packs at once.

Features

Completely built and flight ready – just bind to any DSM2 aircraft transmitter with dual rates and expo
Includes two 150mAh Li-Po flight batteries and E-flite’s Celectra™ 4-port charger and AC adapter
Features Spektrum's new AR6400L Long Throw ultra micro receiver/ESC and servos
Opitional speed brakes included
Unique stamped, preprinted foam construction
Carbon fiber bracing and pushrods
High-power 8.5 coreless brushed motor and 130mm x 70mm prop installed
Also available in PNP (EFL9050)

Average Customer Review: Based on 1 reviewsWrite a review.

1 of 1 people found the following review helpful:

Da Dat da da daaaa Im Luvin It.	February 2, 2010
Reviewer: Justin Gillum from Lewisburg, TN United States

First of all, if you order this Plane, get a roll of gift wrapping tape and tape all leading edges of the plane. Also id recommend cutting a small piece of 1mm carbon rod about 1/2" long to tape on the bottom side of the elevator, it WILL break where its thin in the middle, so Pre-support it. NOT FOR BEGINNERS IMO either, Im no expert by far but RealFlight Basic has helped me handle this little guy.
In Flight:
It will Hover right outta the Box, or mine does.
Harrier Rolls are pretty smooth but I lack in that dept.
Knife Edge flight is a breeze and feels so smooth with very little work to hold it steady.
Ive only flown it outdoors and it preforms well Im sure its a wonderful plane indoors!!!

Thank you for your feedback on this review. We appreciate your input!

Browse for more products in the same category as this item:

R/C Airplanes
R/C Airplanes > E-Flite Store
R/C Airplanes > E-Flite Store > Plug-N-Play/Bind-N-Fly

	E-Flite Mini Ultra Stick PNP $189.99
	Kyosho Tail Rotor Blade Caliber M24 $2.50
	Hangar 9 P-51 Mustang PTS RTF Spektrum $399.99
	Traxxas Blast High Performance Race Boat RTR w/2 Stick Radio $139.99
	HobbyZone Wing Struts w/Screws Super Cub $2.49
	Parkzone Main Landing Gear T-28 $5.49
	Parkzone Clear Canopy & Painted Battery Hatch Corsair $11.39
	E-Flite Blade CP Hardware Set $3.99
	Hobby Zone Rubber Coupler/Aluminum Spline ZZR3 $1.29

Become An Affiliate

Send Us Feedback

Bookmark Us