|
E-Flite Blade CX2 Parts Listing
The Blade CX2 is supported by a full set of replacement parts. Please feel free to contact us if you have any questions or need additional help finding parts.
Tip: If you already have the part number you can enter it directly in our search box above for easy ordering. Otherwise just click on the part number and follow the link. Then use your browser's back button to return to this page for more parts.
|
|
7.4V 800MAH 2S LIPO, JST/BAL BCX/2
|
|
|
|
2-3S LIPO BALANCING CHARGER 0.65A |
|
|
|
AC TO 12VDC, 1.5 AMP POWER SUPPLY |
|
|
|
BIND PLUG BCX2 |
|
|
|
3 IN 1 CTRL UNT, MIXER/ESCS/GYRO BCX2 |
|
|
|
4 IN1 RX ESC MIXER GYRO2.4GHZ BCX2 |
|
|
|
LP5DSM 5-CH TX, 2.4GHZ BCX2 |
|
|
|
TX ANTENNA, 2.4GHZ BCX2 |
|
|
|
BEARING 2X6X3MM (2) BCP/P, BCX/2 |
|
|
|
MOUNTING ACCYS&SCREWDRIVER BCX/2 |
|
|
|
180 MOTOR W/8T .5M PINIONLFT BCX/2 |
|
|
|
180 MOTOR W/8T 0.5M PIN & PTC FUSE LFT BCX/2 |
|
|
|
180 MOTOR W/8T 0.5M PINION RT BCX/2 |
|
|
|
180 MOTOR W/8T 0.5M PINION & PTC FUSE, RIGHT BCX/2 |
|
|
|
OUTER SHAFT&MAIN GEAR SET BCX/2 |
|
|
|
SHAFT RETAINING COLLAR SET BCX/2 |
|
|
|
BEARING 4X8X3MM (2) BCX/2 |
|
|
|
SWASHPLATE SET BCX/2
|
|
|
|
LWR ROTOR HEAD&LINKAGE SET BCX/2 |
|
|
|
SERVO PUSHROD SET BCX/2 |
|
|
|
STABILIZER FLYBAR SET BCX/2 |
|
|
|
LWR MAIN BLADE SET (2 PR) BCX/2 |
|
|
|
UPPER MAIN BLADE SET (2 PR) BCX/2 |
|
|
|
LANDING SKID SET BCX/2 |
|
|
|
BATTERY SUPPORT SET BCX/2 |
|
|
|
HARDWARE SET BCX/2 |
|
|
|
BODY MNT ROD & GROMMET SET BCX/2 |
|
|
|
INNER SHAFT W/ALUM HEAD/HUB BCX/2 |
|
|
|
INNER SHAFT FOR ALUM HEAD/HB BCX/2 |
|
|
|
INNER SHAFT W/HEAD/HUB BCX/2 |
|
|
|
INNER SHAFT MAIN GEAR BCX/2
|
|
|
|
MAIN FRAME SET BCX2 |
|
|
|
FRONT BODY/CANOPY, RED BCX2 |
|
|
|
REAR BODY, RED BCX2 |
|
|
|
COMPLETE BODY SET, RED BCX2 |
|
|
|
6.0 GRAM SUPER SUB-MICRO S60 SERVO |
|
|
|
GEAR SET: S60 |
|
|
|
CASE SET: S60 |
|
|
|
ST&ARD ARM SET, FINE SPLINE S60, DS75
|
Blade CX2 Optional Accessories:
|
|
MICRO/MINI HELI TOOL ASST, 6 PC
|
|
|
|
TRAINER CORD BCX2 |
|
|
|
TRAINING GEAR SET BCX/2 |
|
|
|
OVER CURRENT PROTECT/PTC FUSE HARN(2
For use between the motors and 4-in-1 control unit on models not equipped with factory-installed over-current protection PTC resettable fuse devices. |
|
|
|
MAIN MOTOR HEAT SINK BCX/2 |
|
|
|
FRONT BODY/CANOPY, YELLOW BCX/2 |
|
|
|
REAR BODY,YELLOW BCX/2 |
|
|
|
COMPLETE BODY SET, YELLOW BCX/2 |
|
|
|
FRONT BODY/CANOPY, POLICE BCX/2 |
|
|
|
REAR BODY, POLICE BCX/2 |
|
|
|
COMP BODY SET,POLICE, BLUE BCX/2 |
|
|
|
INNER SHAFT W/ALUM HEAD/HUB BCX/2 |
|
|
|
INNER SHAFT FOR ALUM HEAD/HB BCX/2 |
|
|
|
ALUM BEARINGHOLDER W/BEARING BCX/2 |
|
|
|
ALUM LWR ROTOR HEAD SET BCX/2 |
|
|
|
ALUM SWASHPLATE SET BCX/2 |
|
|
|
FR BODY/CANOPY MARINES W/O DECALS BCX/2 |
|
|
|
REAR BODY, MARINES W/O DECALS BCX/2 |
|
|
|
COMPLETE BODY SET, MARINES BCX/2 |
|
|
|
DECAL SHEET, MARINES BCX/2 |
|
|
|
GUN AND MISSILE SET BCX/2 |
|
|
|
HEAT SINK COMPOUND,5G |
|
|
|
BLADE CX2 SCREW SET |
|
|
|
MICRO HELI TOTE BCX2/BCX/BCP/BCPP
|
|
|
ESP Carbon Fiber Tail Boom Kit BCX2/BCX
|
| EFLH1264 |
Jet Ranger Body Set, Blue/Silver: BCX, BCX2 |
|
| EFLH1263 |
Jet Ranger Body Set, Blue/Red: BCX, BCX2
|
|
Blade CX2 Hop-Ups:
|
