 |
Building: Witch Wilga is easy to build, even for a beginner. The design is straight forward and only requires simple hobby tools and glues. A complete fully illustrated instruction manual guides you step by step through the building process. The sail (wing) is all sewn and ready to fly, and the body, arms, legs and head are laser cut and ready for finishing and final assembly. The kit can be built and ready to fly in less time than many ARF's!
Flight Performance: Witch Wilga is hand launched and takes to the sky easily. With the huge wing area, she will float and come to a virtual stop in mid air. Sky can do high speed dives and even loops. Since Witch Wilga is such a floater, anyone can easily fly her with just rudder and elevator controls. Landings are also easy, just remember that throttle is needed as the elevator has very little effect at low speeds.. She comes down slow and our landing gear will let you touch down, and protect your engine and prop.
Included with Kit: Laser cut coroplast body, arms, head, and legs. Laser cut lite ply. Fully illustrated step by step imanual, full hardware kit (Landing gear, screws, bolts, nuts, fittings, etc...)
Conclusions: Witch Wilga is a sure bet during Halloween or any other Fun Fly. She incredibly easy to assemble and fly. Watch as people are amazed at how steady she is in the air. One pilot even got a ticket for obstructing traffic when cars on the highway stopped in amazement just to watch Witch Wilga flying around
Required to Complete: 3-4 channel radio controller, engine (40-61 two stroke or .45-.72 four stroke), wheels & collars, pushrods, motor mount, hobby glues/epoxy, and basic hobby tools
Click Here To See Wilga in action!
Click Here To See Wilga in action!
|
|
|
