CUSTOMER SERVICE: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Free Ground Shipping
*Orders Over $100
*Oversize Fees May Apply

Read Our Blog Here!
New Stories Weekdays

  Home > RC Parts & Accessories > Airplane Parts >

  Precision Prop Balancer for Quadcopter and Airplane Props
Precision Prop Balancer

Alternative Views:

Our Price: $14.99

Stock Status:(Out of Stock)

Easy to use Prop Balancer! Super Easy - Reliable - Very High Quality

Our new prop balancer is super easy to use. It comes 100% fully assembled and ready to balance your props in just a few minutes! Just unscrew the hub and place your prop on the hub. Then tighten the hub and you are ready to balance. Please note this unit is not able to balance prop hubs. However, if you are looking to have your blades balanced with precision this one is for you! (no props are included in case you were wondering).

Made of metal and carbon fiber parts. Fully assembled and ready to balance your props now.

Need to know how to "Properly" balance a prop? This video is for you

Important: This item ships separate from the DJI Phantom and Blade 350 QX Compass to avoid compass interference and calibration issues.

Warning! - Keep this and any magnetic device away from the compass sensor on your Phantom's (or other GPS Controlled Quad Copter) Landing Gear. Your compass on the Phantom is highly sensitive and a magnetic screw driver or other device like this could cause your compass to loose calibration.
Balances any prop with a hub less than 1" in diameter. Balances nearly all quadcopter and model airplane props. Measures 2 1/8" wide 2" Tall

Average Customer Review: 4.5 of 5 | Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
Prop Balancer January 8, 2014
Reviewer: Gary from Mahtomedi, MN United States  
Easy to use and portable enough to fit in my range case. Came free with the 350QX prop adapters and CF props so, the price was right!
Thanks RR!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
my first magnetic balancer January 7, 2014
Reviewer: Chris P. from Berkeley, CA  
Needs a bit of nudging to get a good idea of which way the props wanted to fall.  Though it's magnetic, one end still makes contact with the physical magnet, and it isn't a perfect point, so there's some friction there that can disturb your measurements.

Was this review helpful to you?

Browse for more products in the same category as this item:

RC Parts & Accessories > Airplane Parts
RC Parts & Accessories > Airplane Parts > Dubro Parts
DJI Phantom Quad Copter Complete Parts Listing
Stocking Stuffers