• (2) LiPo Flight Batteries
• (1) UFO Quadcopter RTF
• (1) 2.4Ghz Digital Transmitter
• (1) Spare Props package
• (1) Owner's Manual
• (1) Dual Lipo USB Charger

*Requires (4) AA Batteries (Not Included)

• Flight Batteries: The lead wires that come out of the battery can be pulled off if you use the cable to pull the battery out of the battery holder on the aircraft. Use care to not pull the wires too hard.
  
• Flight Battery Charging: When you notice a significant power loss in the aircraft, land and allow your battery to cool before charging again. If you over discharge the flight battery it may not hold a charge again. Always allow the battery to cool before you charge again. This will improve battery life.
• Radio Binding: To bind the radio transmitter to the quadcopter...simply turn the radio on. Then plug the flight battery into the quadcopter. Move the throttle all the way forward and then back to off. Within 20 seconds you should hear a series of beeps confirming a radio link. You are now ready to fly
• Spend time flying in mode 1 (regular flying mode) before trying advanced mode (mode 2).
  
• Outdoor Flying: When flying outside make sure you don't get the quadcopter too far away if you are a new pilot. Often times, wind currents can be much stronger above ground than at the surface. The quadcopter is small enough that you can loose it if you get it too high. This quadcopter can climb out of sight in a very short amount of time.