CUSTOMER SERVICE: 1-541-205-6610 (9am-4pm PT Mon-Fri)

Free Ground Shipping
*Orders Over $110
*Oversize Fees May Apply









Blog
Read Our Blog Here!
New Stories Weekdays




Return to Dubro Tru-Spin Prop Balancer
Sort By::
Page of 1


  0 of 0 people found the following review helpful:
 
Awesome product! October 7, 2013
Reviewer: Fyathyrio from SoCal  
I know there are tons of cheaper methods to balance props, but having a quality tool to do an important task is always a pleasure.  With 12 props to balance, the time saved was worth the cost also.  A little CA and some 400 grit and I really took the buzz out of my Phantom.

Stock DJI Phantom blades have 2 flats that prevent the prop balancer cones from centering the prop correctly as the noses touch before getting a firm purchase in the prop hole.  Turn one of the cones around and use the flat side on the bottom of the prop and it will center and hold nicely.  The top of the prop has two raised letters that prevent the flat side from centering, and will also prevent the nuts from holding the props to the motor, so make sure to sand those off smooth.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Dubro Tru-Spin Prop Balancer July 15, 2013
Reviewer: Charles Merkel from Plano, TX United States  
Being new to  quad copter flying, it didn't take long to realize the importance of prop balance. This system worked as advertised . It is amazing to see how little it takes to bring a prop into balance.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Perfect Balancer July 2, 2013
Reviewer: Ricki Kaminski from Trinity, TX United States  
Works great. No problems at all with assembly or operation. If you use this with standard Phantom blades place one of the cones with the "flat" side towards the square hole in blade - tapered end of the other cone towards the circular hole - seems to work better for me.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Top of the line April 19, 2013
Reviewer: Chris from Bluffton, SC United States  
This is truly easy to assemble and manufactured to close tolerance. Only needed a small hammer to completely seat the nuts on the bottom side of the base plate. Balancing my blades has become the easiest parts of the hobby.. A must have...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product! April 16, 2013
Reviewer: Bart from Lakeview, OR United States  
A "must have" tool for any serious RC pilot, the Dubro Spin Balancer is very easy to use and gets the job done right!
Made in the USA, baby!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works well after difficult assembly April 4, 2013
Reviewer: Anonymous Person from Reading, PA United States  
The machining of the hardware is horrible.  Thumbscrews that should twist on effortlessly need to be cranked on with pliers to chase the threads.  It was necessary to retap one of the mated screws/posts.  What looks like a 5 minute job to assemble, took over an hour.  But once together and the threads have been chased, the balancer works great.

Was this review helpful to you?