CUSTOMER SERVICE: 1-541-205-6610 (8am-5pm PT Mon-Thur 8am-12pm Fri)

Free Ground Shipping
*Orders Over $110
*Oversize Fees May Apply









Blog
Read Our Blog Here!
New Stories Weekdays





  Home > Helicopter Accessories >

  350QX Prop Adapter Bundle with 4 Carbon Fiber Propellers
350QX Prop Adapter Bundle with 4 Carbon Fiber Propellers


 
Alternative Views:


Our Price: $52.93

Stock Status:(Out of Stock)
Product Code: RRH350QXPROPADAPTER-CFBUNDLE
Qty:

Description Important Information
 
This bundle includes (1) Propeller adapter set with (2) Clockwise Carbon Fiber blades and (2) Counter Clockwise Carbon Fiber Blades.
These Carbon Fiber blades have been tested with the 350 QX propeller adapters and the 350 QX

Please note that the Carbon Fiber propellers do NOT have directional arrows indicating the correct propeller for the specific motor. Please use caution when switching to the carbon fiber propellers and verify correct pitch before removing and replacing propellers.


Each E-Flite Blade 350QX propeller adapter is CNC machined from billet aluminum. These adapters will bolt on to the stock BLH7802 motors allowing for a large variety of aftermarket propellers to be used. They have a 6mm propeller shaft which can be used with the traditional style quadcopter propeller sets.

The adapters are very strong and light. Replacing the stock propellers with a good quality aftermarket propeller will give you the confidence needed for worry free flying.

This set includes 2 right handed thread adapters and 2 left handed thread adapters.

Installation is quick and simple. No modifications necessary.

Make the switch even easier with the RC Logger Bit Set

Give you new propeller adapter set a nice finished look by adding these propeller nuts.

CNC Prop Nut Set

Also Sold individually in Red (CW), Blue (CCW), Silver (CW) and Black (CCW)

Two step installation:

  1. Install prop adapter onto stock BLH7802 motor using the supplied M2.5 x 4mm socket head screws.
    (each bag will be labeled indicating which motor the adapters should be installed on)
  2. Install propeller onto adapter using supplied M6 Hex Nut.

Included: 4 - E-Flite Blade 350QX Prop Adapters (2 right handed thread / 2 left handed thread), 16 - M2.5 x 4mm socket head screws
2 - M6 right handed thread hex nuts, 2 - M6 left handed thread hex nuts, 4 - M6 Flat Washers

Weight (single prop adapter only): 3.1g

Dimensions:

  • Shaft Diameter: 6mm
  • Shaft Thread: M6x1.0 (2 right handed thread and 2 left handed thread)
  • Shaft Length: 15.2mm
  • Base Thickness: 5.5mm


Compatible Motors

Blade Helicopters BLH7802

**IMPORTANT: Don't use the screws that came with the 350 QX to bolt the prop adapters on the motors. Serious damage to your motor will result. You will cry for what will happen!

E-Flite Blade 350QX Carbon Fiber Blades

Our 350QX Prop Adapter Bundle set includes two clockwise carbon fiber blades and two counter clockwise carbon fiber blades. When you choose to buy a complete set of blades for Blade 350QX, you will receive a reliable, high-quality product that provides you with the utmost confidence for worry-free flying. 350QX carbon fiber blades come in one of the best quality aftermarket propeller sets available for purchase. This carbon fiber propeller set is extremely light-weight while remaining durable.

Each set of carbon fiber blades for the Blade 350QX is CNC machined from billet aluminum. These after market props for Blade 350 QX can simply be bolted on in a matter of minutes with absolutely no additional modifications needed.


Average Customer Review: 4.5 of 5 | Total Reviews: 15 Write a review.

Accessories for this product...
Single Red CW Propeller Nut
Our Price: $2.49

Add
Single Red CW Propeller Nut
RC Logger Bits Set
Our Price: $24.90

Add
RC Logger Bits Set
E-Flite Blade 350QX Prop Nut Set
Our Price: $13.95

Add
E-Flite Blade 350QX Prop Nut Set
4 Propeller Nuts Set (2 Black CCW & 2 Red CW)
Our Price: $8.96

Add
4 Propeller Nuts Set (2 Black CCW & 2 Red CW) for the DJI-Phantom or the 350 QX Propeler Adapter Set


  1 of 1 people found the following review helpful:
 
Happy with my purchase April 23, 2014
Reviewer: Irwin Malzman from Las Vegas, NV United States  
Item as described.
Customer Service is Second to None.
Thanks.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
350QX Prop Adapter Bundle with 4 Carbon Fiber Prop April 13, 2014
Reviewer: Ron Rush from Enid, OK United States  
The prop adapters and the 4 carbon fiber props were great a very good ugrade for the QX 350 .
Extreamly fast shiping and great People to talk to. I would recommend Redrocket hobbies to every one.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
my evaluation with 30+ flights with this bundle March 31, 2014
Reviewer: Randy from Rocklin, CA United States  
The props will need balancing! Be sure to check balance before install and flight. Easy to install. I suggest to use a tiny amount on thread lock for screws for adapters. apply to screws only and do not allow any to get in or on your motors! Also make sure the nuts for the props are tight and DO NOT use thread lock on those! OVERALL, the STOCK PROPS are  better for top speed, agility, battery life, and stability. I say if you're looking for safe props that wont break as easy as the stock ones then this set is a good option!

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
These props have no lift.... March 7, 2014
Reviewer: Mark Daniel Imaging from Hampstead, MD United States  
I tested these with 2 different brand of batteries.  The original E flight battery, and the Lectron Pro 2700, 35 C battery.  With the Original battery I got 3.5 minutes of flight,  with the Lectron, I got 3 minutes of flight.  

This cut my flight time in half compared to the original plastic props with the same rig which is the quad with a gimbal and camera.  

Having said that, it is also obvious to you that it seemed to take twice as much throttle as to lift as with the stock props.

I find this completely unacceptable.  So much so, that I am not even going to retry balancing these props.  

The props were a waste of money!

If you want to see my video with these, type in Mark Daniel Imaging in Youtube.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
350QX prop adaptor bundle W/4 carbon fiber props February 20, 2014
Reviewer: Casey Davenport from Lake Tapps, WA United States  
Delivery was prompt and accurate.  The adaptors look great and work well, i do wish that the bundle came with the bullet nuts as they look better.  I had to learn how to balance carbon fiber blades as they are different than plastic so buyer be aware of that and two of the props needed allot of help.  Once balanced though they work well and are quieter than stock props.  I feel that the stock props actually are faster than these props but I wanted to make a black stealth 350QX and these look awesome with a flat black body set.  Battery life is about the same, maybe a tiny bit longer with stock props but not much.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Helicopter Accessories
Blade 350 QX Parts Listing
Blade 350 QX Parts Listing > Optional Accessories
Blade 350 QX Parts Listing > Optional Propellers